CO2 Laser Tube
We are involved in offering an extensive range of CO2 Laser Tube. From 80W-300W. Lifetime is more than 10000hrs . Small laser spot makes very good cutting performance. Our tube is one of the most Stable Laser Tube in market.
For further details, pls click to talk via Wechat / Whatsapp / Online chat / Email
| Model | Power | Peak Power | Length (mm) | Diameter (mm) | Catalyst | Net Weight (kgs) | Gross Weight (kgs) | Carton Package (cm) | Warranty |
|---|---|---|---|---|---|---|---|---|---|
| C90 | 80W | 100W | 1250 | 80 | Yes | 2.52 | 3.78 | 138*17.3*15.5 | 10 months |
| C100 | 100W | 130W | 1450 | 80 | Yes | 2.90 | 4.30 | 158*17.3*15.5 | 10 months |
| C130 | 130W | 150W | 1650 | 80 | Yes | 3.30 | 4.80 | 178*17.3*15.5 | 10 months |
| C150 | 150W | 180W | 1850 | 80 | Yes | 3.76 | 5.42 | 198*17.3*15.5 | 10 months |
- Installation Requirement
Make sure to follow the operation instruction of model as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
- Operation conditions
1) Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
2) The operating environment: temperature 2-40℃; humidity 10-60%.
3) The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. 4) The ammeter must be connected to the negative electrode of laser tube.
5) When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.
6) To protect dust from going into the insulation sheath, please wrap it with plastic film.
- Working Performance
Cutting function.
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
- Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don’t work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
- Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
- Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
Tubes operated in wrong way are not guaranteed by Manufacturer.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We’ll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the ‘Complete Orders’ link under the My Account menu and click the Return Item(s) button. We’ll notify you via e-mail of your refund once we’ve received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Unique glass-metal sealing technology and standard industrial production has been applied.
- Stability: The tube blanks are made of the glass tubes, we apply glass-to-metal sealing technique to co2 laser tubes.
- Long-lifetime: The catalyst plated in the discharge tube coordinates unique eletrode treatment technique to make discharge more stably and the working lifetime more than10,000 hours (According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine) and ensures that the power of the laser tube has no attenuation during long time working.
- Spot mode: Adjustable resonator, good beam quality, stable powers are excellent in performance-to-price ratio for industrial application.
- Worry-free warranty: We offer a limited 10 months warranty for you. For any problem, please feel free to contact us.
How to choose the machine tube power ?
It depens on what size of material do you want to cut and how thick of material do you want to cut .If you want to cut thick material , then choose a big power . If you want to engrave , then choose a small power.
What materials can we cut ?
All nonmetal material you can cut by this model. Such as wood, paper , acrylic , leather ,rubber , Mdf ,cloth , texitle and so on .
Tube can do both cut and engrave ?
Yes ,can do both cut and engrave.
Will it damaged on the way ?
As usual we packed with wooden box . Very safe .No damage on the way before . Also we can buy insurance for you if you are worried about it.
How long time of warranty can i get for laser machine and laser parts ?
You get ten months full warranty with the machine .If its our quality problem, we will send you parts through International Express free. It takes only 3 days as usual.
How you provide help if we met any problems ?
Our engineers with more than 10 years experience , we will provide you guide online through whatsapp , wechat , skype etc.
Do you export tube?
Yes , we export tube to the worldwide . Such as india , vietnam , korea, uk, germany , italy, brazil , mexico, colombia, peru and more than 60 countries. We know all process for export . So please don’t worry about it .
- Tube Parameters
-
Model Power Peak Power Length
(mm)Diameter
(mm)Catalyst Net Weight
(kgs)Gross Weight
(kgs)Carton Package
(cm)Warranty C90 80W 100W 1250 80 Yes 2.52 3.78 138*17.3*15.5 10 months C100 100W 130W 1450 80 Yes 2.90 4.30 158*17.3*15.5 10 months C130 130W 150W 1650 80 Yes 3.30 4.80 178*17.3*15.5 10 months C150 150W 180W 1850 80 Yes 3.76 5.42 198*17.3*15.5 10 months - Operation Instruction
-
- Installation Requirement
Make sure to follow the operation instruction of model as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
- Operation conditions
1) Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
2) The operating environment: temperature 2-40℃; humidity 10-60%.
3) The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. 4) The ammeter must be connected to the negative electrode of laser tube.
5) When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.
6) To protect dust from going into the insulation sheath, please wrap it with plastic film.
- Working Performance
Cutting function.
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
- Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don’t work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
- Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
- Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
Tubes operated in wrong way are not guaranteed by Manufacturer.
- Shipping &Returns
-
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We’ll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the ‘Complete Orders’ link under the My Account menu and click the Return Item(s) button. We’ll notify you via e-mail of your refund once we’ve received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Advantages
-
- Unique glass-metal sealing technology and standard industrial production has been applied.
- Stability: The tube blanks are made of the glass tubes, we apply glass-to-metal sealing technique to co2 laser tubes.
- Long-lifetime: The catalyst plated in the discharge tube coordinates unique eletrode treatment technique to make discharge more stably and the working lifetime more than10,000 hours (According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine) and ensures that the power of the laser tube has no attenuation during long time working.
- Spot mode: Adjustable resonator, good beam quality, stable powers are excellent in performance-to-price ratio for industrial application.
- Worry-free warranty: We offer a limited 10 months warranty for you. For any problem, please feel free to contact us.
- FAQ
-
How to choose the machine tube power ?
It depens on what size of material do you want to cut and how thick of material do you want to cut .If you want to cut thick material , then choose a big power . If you want to engrave , then choose a small power.
What materials can we cut ?
All nonmetal material you can cut by this model. Such as wood, paper , acrylic , leather ,rubber , Mdf ,cloth , texitle and so on .
Tube can do both cut and engrave ?
Yes ,can do both cut and engrave.
Will it damaged on the way ?
As usual we packed with wooden box . Very safe .No damage on the way before . Also we can buy insurance for you if you are worried about it.
How long time of warranty can i get for laser machine and laser parts ?
You get ten months full warranty with the machine .If its our quality problem, we will send you parts through International Express free. It takes only 3 days as usual.
How you provide help if we met any problems ?
Our engineers with more than 10 years experience , we will provide you guide online through whatsapp , wechat , skype etc.
Do you export tube?
Yes , we export tube to the worldwide . Such as india , vietnam , korea, uk, germany , italy, brazil , mexico, colombia, peru and more than 60 countries. We know all process for export . So please don’t worry about it .